HOBBYTECH 1/8 RTR Orange Desert Buggy Racer Type SL – HT-SL.DB8.OR

HOBBYTECH 1/8 RTR Orange Desert Buggy type SL – HT-SL.DB8.OR

The DB8SL will take you to the terrain you had always dreamed of, this vehicle is a monster of power capable of crossing most obstacles day and night thanks to its LED kit included.

Features:

New & reinforced swingarms / wishbones
New rear mud flaps to protect the axles & dampers
Oil “Race” shock absorber made of aluminum
Waterproof receiver box
Despite the scale body and roll cage, changing the battery is lightning fast
Powerful 17kg servo with metal gear
80Amp waterproof brushless controller by HobbyWing for up to 3S LiPos
Powerful 2750kv brushless motor with 5mm axle by HobbyWing
Ultra stable central aluminum drive shaft “Anti Flex”
Steel sprocket with 30 teeth and 32dpi
High current resistant Deans / T-plug
900mAH charger with balancer function for 2-3S Lipos
Front & rear differential made of metal
Middle differential with metal gear
CNC machined 1cm ultra thick motor mount, adj and secured with 3 screws
Aluminum CNC machined Ackermann plate
CNC machined aluminum front & rear shock tower
Damper bridges front and rear made of aluminum
Shock absorbers with protective boats for piston rods
Stabilizers on the front and rear axles
Fully ball bearing
Right / left threaded rods on the compl. suspension
CCD universal joint drive shafts in front
12mm aluminum wheel carrier
Performance dirt cross devil tires
LED headlights on the roof
New 2.4GHz Konect KT2S + remote control incl programmable EPA function
Aluminum front & rear rammer fenders / skid plates
Multiple setup options thanks to numerous suspension points
Lacquered & glued Lexan Cap-Forwad body by BittyDesign Made in Italy
Operating instructions in German / English / French
Specs:

Height / Max. : 175 mm
Wheelbase / Wheelbase: 322 mm
Front width / Track (front): 306 mm
Rear width / Track (rear): 310 mm
Front ride height / Front ground clearance: 54 mm
Rear ride height / Rear ground clearance: 56 mm
Weight / Total weight: 2330 gr
Radio Specs

Servo direction
reversal ATV potentiometer (dual rate) on channel 1
TRIM potentiometers
on channels 1 and 2 Electronic limit switch adjustment on channels 1 and 2
Weight: 300g
KT2S + 2 Way Receiver
Dimensions: 38 × 23.5x14mm
Weight: 8g
ESC Specs:

Special for SL type cars Short Course / Truck / Monster truck
Compatible Sensorless brushless motor
Power 80A continuous
Power 520A peak
Resistance 0.0010 Ω
Motor limit 5000 Kv in 2S and 3000 Kv in 3S
Supply 6 to 9 elements in nimh
Supply 2 to 3S in Lipo (11.1v)
BEC: 6v-7.4v / 3A
Dimensions: 49 × 39.5 × 34.7mm
Weight: 105g Programmable
Thermal Protection
via external card (not supplied)
DEAN connector
Manufactured by HOBBYWING
Motor Specs:

Compatible with 10.8V Ni-MH and 2-3S Li-Po
2750KV
Dimensions: Φ = 36mm – L = 60mm
Axis: Φ = 5mm – L = 18.5mm
Resistance: 0.0083 Ω
Poles: 4
Amp: 2.8A
Weight: 247 g
**Requires Battery and Charger