Futaba T6K 8 ch T-FHSS inc R3006SB Mode2 inc charger

T6K 8ch FHSS inc R3006SB Mode2

An incredible value in 8-channel control

UPDATED VERSION 2 OFFERS 8 CHANNELS OF CONTROL!
To get the most radio for your money, check out the new 6K — an easy-to-program flight system with versatile functions that include telemetry, S.Bus/S.Bus2 compatibility and 30 model memory. With Version 2 updates, it’s now a better value than ever. The NEW 6K is an 8-channel system with additional telemetry functions, expanded multicopter flight modes and much more.

NEW IN THE 6K VERSION 2:
Two additional channels

Channels 7/8 are used through the R3006SB receiver’s S.Bus/S.Bus2 ports
Allow for expansions or adding accessories
Can be assigned to any of the four switches or VR dial
Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer
Expanded Flight Modes (Fly Mod) in multicopter programming

Priority — toggle through five different values assigned to flight modes on an assigned channel
Matrix — up to nine combinations using two, 3-position switches for controlling gimbals
Vibration alerts with timer functions and Throttle Integrate

SBS-01C current sensor and SBS-01V voltage sensor compatible

You’ll be hard pressed to find another 6-channel system with as many functions as the 6K at a comparable price. Telemetry sensors monitor critical flight data, including temperature, RPM, altitude, receiver battery voltage, external voltage and variometer. It’s compatible with S.Bus and S.Bus2 servos, and setting functions can be programmed through the transmitter. Controls are positioned to be within easy reach, and the menu is a breeze to navigate. Throw in other features such as 30 model memory, a 128×64 DOT backlit LCD screen and updateable software, and it’s easy to see how the 6K is a lot of radio for the money.

System features

S-FHSS/T-FHSS selectable
Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
Built-in antenna
S.Bus/S.Bus2 servo setting functions programmable through the transmitter
Preset vibration alarms
30 model memory
8-character model/user naming
Programmable mixes for airplanes, helicopters, gliders and multi-rotors
Digital trims with variable step settings
Adjustable stick length and tension
Changeable switch/VR position and AUX channel function
Throttle position warning
Backlit 128×64 DOT LCD screen with adjustable display contrast
Software updateable through the CIU-2
Screen Lock
Earphone/S.Bus/Trainer jacks
Assignable switches (three 3-position, one 2-position)
Range Check
Program navigation bay with jog dial, +/- pads and end pad
Data reset
Model copy
Selectable model type
Fail Safe
End Points
Trim/Trim Resets/Trim Steps
Sub Trim
Servo Reversing
Parameter functions
Servo monitor/Test
Wireless model data transfer
Timer-System and Model (Up/Down)
Trainer system
Airplane Functions

Wing Type (5-wing, 2-tail)
Throttle Cut
Dual Rate/Expo
Throttle Curve
Idle down
Gyro
Aileron differential
V-Tail
Camber
Air Brake
Elevator-to-Flap mixing
Flap-to-Elevator mixing
Elevon mixing
Glider Functions

Wing Type (5-Wing, 2-Tail)
Condition select
Dual Rate/Expo
Motor switch
Gyro
Aileron Differential
V-tail
Butterfly mixing
Trim mixing
Elevator-to-Camber mixing
Camber mixing
Aileron-to-Camber mixing

Helicopter Functions
Swash type (6)
Condition Select
Throttle Cut
Dual Rate/Expo
Trim Offset
Delay
Gyro mixing
Swash AFR
Swash mixing
Throttle Curve (5-point)
Pitch Curve (5-point)
Pitch-to-Rudder mixing
Throttle Hold
Hovering throttle
Hovering pitch
Multicopter Functions

Flight Mode
Center alarm
Dual Rate/Expo
Throttle Curve
Throttle Delay
Gyro